1.) Remove butyl tape from package, cut the butyl tape to fit the diameter of the pipe so the ends meet, but do not overlap. Remove paper backing and line up the edge directly against the joint. Remove the roll of rubber tape from the package and remove all paper backing from one end.

2.) Apply the adhesive section of the rubber tape directly on the the outer half of the butyl tape farthest from the joint. The adhesive should be half anchored on the pipe, the other half on top of the butyl tape as in illustration number 2. Begin wrapping the tape stretching it to maximum tension. Apply 5 wraps over this section working inward towards and over the joint squeezing the butyl tape underneath into the gaps of the joint until satisfied the leaking has stopped.

3.) Once satisfied the leak is sealed you can apply the Syntho-Glass fiberglass cloth contained in the foil pouch to make the repair permanent. If you want to replace the coupling do not apply the fiberglass cloth because it sets rock hard in thirty minutes. Instead consider freezing the pipe using the Eskimo mini Freezer for pipes up to 1", Eskimo Pipe Freezer for pipes up to 2", or FREEZALL - Portable Do-It-Yourself Pipe-Freezing Equipment jacket kits for larger pipes from 2-1/2" to 6". All operated using ozone safe liquid CO2. No CFC's1

Key Features

Allows Repairs to be performed with active line pressures up to 60 psi.
The rubber sealing tape allows the leak to be sealed or tied off while it is under pressure.
No need to shut down a production line!
This Under Pressure Joint Repair kit means your production line or water service will stay operational and no loss of production or water supply to the building.

Butyl Tape

Works as a stop gap on leaky piping systems, only works under pressure with Rubber Tape!

Rubber Tape

Squeezes butyl rubber into gaps of leaking pipe joints and ties off active leaks on cracked pipes.

Syntho-Glass

Instant Repair Kit

A new miracle resin coated fiberglass cloth repair and maintenance system that will set even under water. The fiberglass cloth has been impregnated with a water activated resin prior to packaging. Simply use directly from the package. Normal setting time is 30 minutes, but may vary depending on temperature. Water, salt or fresh, is the activator! Ideal for applications in the splash zone, corrosion protection, reinforcement, piling protection, and electrical insulation to 16,000 volts. Will function up to 500 degrees F. Ideal for all types of repairs and maintenance applications. Odorless, non-combustible, and non-toxic. Can be sanded and painted if desired. Once set, gas, oil or diesel fuel will not effect the repair material.

Information Request Product Order Form

Under Pressure Joint Repair

Product#	Pipe Size to Repair	Cloth Size Width by Length	Price Each	Check Box to Order Below	Choose Quantity
JRK5200	1/2" to 1"	2" x 5'	$34.11
JRK9300	1-1/4" to 2"	3" x 9'	$44.03
JRK4150	2-1/2" to 4"	4" x 15'	$89.22
JRK4300	4-1/2" to 6"	4" x 30'	$171.83

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me
Send me a unit. Contact me by phone for my Visa, Master Card, or AMX

	Bill & Ship To:
Company:
Your Name:
Title:
Purchase Order #:
Credit Card #, Expiration Date
	Shipping Info:
Ship To Name:
Company:
Address:

City:
State, Zip:
	Contact Info:
E-mail:
Phone:
Fax:
Your Website:

Note: Your Credit Card Info will not be given to anyone but the M&S Valves & Fittings Company.

We respect your privacy and understand if you choose to exclude it in your request.

Please tell us how you arrived at our web site

Please contact me as soon as possible regarding this matter.

*You will be given an opportunity to review your order after clicking the submit button. If no changes are necessary you need not do anything else as your order will be submitted the way you see it.

You may return to this page to make changes by using your back button on your browser. The last time you submit this page will be considered a single order and all previous submission attempts will be ignored as multiple items and quantities of each item can be ordered on this single page. Order Submissions from other product pages will be considered separate but valid orders even if you use the same purchase order number.