REMS Curvo : Pipe Bending Equipment : Msvalves.com

Universal,compact electric tool for cold bending of pipes and tubes up to180º.Can be used anywhere, without vice.For workshop, job site, repair.
Hard, half-hard, soft copper tubes also thin-wall	Ø10-35mm
Hard, half-hard, soft copper tubes also thin-wall	Ø 3/8-1 3/8"
Coated soft copper tubes, also thin-wall	Ø 10-18 mm
Stainless steel tubes of pressfitting systems	Ø 12-28 mm
Coated steel tubes of pressfitting system mapress C-STAHL	Ø 12-28 mm
Soft precision steel tubes	Ø 10-30 mm
Steel pipes DIN 2440	Ø 1/4-3/4"
Electric conduit DIN EN 50086	Ø 16-32 mm
Multi-layer composite tubes	Ø 14-40 mm

REMS Curvo- wrinkle fee bending. Universal for many pipes and tubes. Instant use without

setting. Fast creep speed operation for precise bending. Rapid change of bending and back formers.

Univerasl Use-

For sanitary, heating, air conditioning,refridgerating and hydraulic applications. Speciallysuited for tubes

of pressfitting systems, for hard and half-hard copper tubes and for thin-walled copper heating tubes

according to DIN EN 1057.

System Advantage-

Only one type of bending and back formers for REMS Curvo and REMS Sinus. Therefore simple,

inexpensive stocking. No confusion possible.

Cost Advantage-

Bender cost recovered after a small number of bends. No cost for fittings, storage, procurement.

Savings in soldering joints, pressing joints and working hours. Higher safety thanks to fewer pipe joints.

Execution-

Compact, handy electric tool with intgral absortion of torque during bending. Super light, drive unit

only 8 kg. Can be used anywhere, anytime. No setting. Simple, effortless, fast working, e.g. 90º bends,

Ø 22 mm in only 6 s. Fast and creep speed operation for precise bending. Crossover, swan-neck,

U-bends possible. Height adjustible machine support as accessory.

Bending Formers and Back Formers-

Form and pressure resistant, in high-strength, high-slide, glass-fibre reinforced polyamide.

Optimum mating of bending formers and back formers ensures sliding appropriate to the material

without cracks and wrinkles. Angle scale 0 to 180º provided on each bending former and mark on the

back former ensure precise bending , Rapid change of of bending fromers and back fromers. Bending

formers and back formers for different sizes, materials and bending radii, see table lower on page.

Drive-

Robust, maintenance-free gear. Final point safety in both directions throught safty slipping clutch.Proven,

powerful universal motor, 1000W. Right and left-hand rotation. Stepless electronic safty switch for rapid

and creep speed operation.

Bending Lubricant-

REMS bending spray ensures a permantent lubricating film for reducing energy expenditure and uniform

bending. High-pressure-proof, acid-free. CFC-free, so ozone-harmless.

Supply Format-

Information Request Product Order Form

Pipe Bending Equipment

REMS Curvo Baisic-Pack. Electric pipe and tube bender Ø 10-40 mm, Ø 1/4 - 1 3/8", up to 180º. Hard, half hard and soft copper tubes, also thin-wall Ø 10-35 mm, Ø 3/8 - 1 3/8", coated soft copper tubes , also thin-wall Ø 10 - 18 mm, stainless steel tubes of pressfitting systems Ø 12 - 28 mm, coated steel tubes of pressfitting system mapress C-STAHL Ø 12 - 28 mm, soft precision steel tubes Ø 10 - 30 mm, steel pipes DIN 2440 Ø 1/4 - 3/4", electric conduit DIN EN 50086 Ø 16 - 32 mm, multi-layer composite tubes Ø 14 - 40 mm and others. Drive unit with maintenance-free gaer and safety slipping clutch, universal motor 230 V or 110 V, 50 - 60 Hz, 1000 W, stepless electronic safety switch, right and left-hand rotation, insert bolt. Bending formers and back fromers. In sturdy steel case.

Information Request Product Order Form

Description	Article #	Price	Check Box to Order Below	Choose Quantity
Baisic-Pack	580010	$ 1,395.00
Set 3/8-1/2-5/8-3/4-7/8"	580024	$ 1,895.00
REMS Machine Support 3B for Curvo & Tripod complete	586100	$ 229.00
REMS Machine Support WB for mounting on workbench	586150	$ 159.00
REMS Bending & Back Former 10 mm for Curvo	581400	$ 139.00
REMS Bending & Back Former 12 mm for Curvo	581410	$ 145.00
REMS Bending & Back Former 14 mm for Curvo	581420	$ 145.00
REMS Bending & Back Former 15 mm for Curvo	581430	$ 145.00
REMS Bending & Back Former 16 mm for Curvo	581440	$ 159.00
REMS Bending & Back Former 17 mm for Curvo	581110	$ 165.00
REMS Bending & Back Former 18 mm for Curvo	581450	$ 179.00
REMS Bending & Back Former 20 mm for Curvo	581080	$ 199.00
REMS Bending & Back Former 22 mm for Curvo	581460	$ 199.00
REMS Bending & Back Former 22 mm for Curvo	581470	$ 229.00
REMS Bending & Back Former 24 mm for Curvo	581130	$ 229.00
REMS Bending & Back Former 25 mm for Curvo	581180	$ 329.00
REMS Bending & Back Former 26 mm for Curvo	581270	$ 329.00
REMS Bending & Back Former 28 mm for Curvo	581070	$ 329.00
REMS Bending & Back Former 28 mm for Curvo	581310	$ 379.00
REMS Bending & Back Former 30 mm for Curvo	581150	$ 329.00
REMS Bending & Back Former 32 mm for Curvo	581280	$ 329.00
REMS Bending & Back Former 32 mm for Curvo	581320	$ 389.00
REMS Bending & Back Former 40 mm for Curvo	581330	$ 479.00
REMS Bending & Back Former 3/8" (9.5 mm) for Curvo	581200	$ 145.00
REMS Bending & Back Former 1/2" (12.7 mm) for Curvo	581210	$ 145.00
REMS Bending & Back Former 5/8" (15.9 mm) for Curvo	581220	$ 165.00
REMS Bending & Back Former 3/4" (19.1 mm) for Curvo	581230	$ 199.00
REMS Bending & Back Former 7/8" (22.2 mm) for Curvo	581240	$ 229.00
REMS Bending & Back Former 1" (25.4 mm) for Curvo	581250	$ 279.00
REMS Bending & Back Former 1 1/8" (28.6 mm) for Curvo	581360	$ 329.00
REMS Bending & Back Former 1 3/8" (34.9 mm) for Curvo	581350	$ 479.00

Pipe Bending Equipment

Accessories-

Description	Article #	Price	Check Box to Order Below	Choose Quantity
REMS Curvo drive unit	580000
Insert bolt	582036
REMS bending spray, 400 ml	140120
Steel case with insert	586000
Machine support 3B, hieght adjustible, on tripod	586100	$229.00
Machine support WB, height adjustable, for mounting on work bench	586150	$159.00

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me
Placed Order For Parts
Send me a unit. Contact me by phone for my Visa, Master Card, or AMX

	Bill & Ship To:
Company:
Your Name:
Title:
Purchase Order #:
Credit Card #, Expiration Date
	Shipping Info:
Ship To Name:
Company:
Address:

City:
State, Zip:
	Contact Info:
E-mail:
Phone:
Fax:
Your Website:

Note: Your Credit Card Info will not be given to anyone but the M&S Valves & Fittings Company.

We respect your privacy and understand if you choose to exclude it in your request.

Please tell us how you arrived at our web site

Please contact me as soon as possible regarding this matter.

*You will be given an opportunity to review your order after clicking the submit button. If no changes are necessary you need not do anything else as your order will be submitted the way you see it.

You may return to this page to make changes by using your back button on your browser. The last time you submit this page will be considered a single order and all previous submission attempts will be ignored as multiple items and quantities of each item can be ordered on this single page. Order Submissions from other product pages will be considered separate but valid orders even if you use the same purchase order number.

Tube Bending Machines | Tube Benders | Life FLO | Threaded Rod Cutters | Sitemap
Author Jason P. Moore.
Copyright © 2011 [M&S Valves & Fittings]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Send mail to CompanyWebmaster with questions or comments about this web site.
Last modified: March 24, 2011