|
Products:
| |
|
REMS Amigo 2 Compact |
Also Look at
Amigo
Amigo2 |
|
The smallest and lightest up to 2" |
Only $1895 |
-
Super strong
-
Quick-change die heads
Pipe threads 1/8–2”, 16–50 mm
Bolt threads 6–30 mm, 1/4–1”
Small and Light
|
 |
Powerful,
easy-to-operate electric tool for threading with unique support bracket. Ready
for use any-where, without vice. Ideal for repair, renovation, job site.
One type of small, compact quick-change
die heads and one type of dies only for REMS Mini-Amigo, REMS Amigo, REMS
Amigo 2, REMS Amigo 2 Compact and REMS Eva. Thus efficient and easy stocking.
No confusion possible.
Solid, easy to use, supports the die stock
against torque in both directions. Secure clamping through angular clamping
spindle with self-supporting effect. Very simple mounting of die stock onto
support bracket and pipe.
Compact, robust, job site-proven. Can be
used anywhere, even without vice. Slender design for working in confined
areas. Drive unit only 4.9 kg, without die head. Perfect seating of
quick-change die heads.
Solid, maintenance-free gear. Robust 1200 W
universal motor with 30% power increase thanks to automatic carbon brush
adjustment while changing the direction of rotation. Peak power input up to
1800 W. Fast threading time 30–18 rpm. Safety tip switch.
Proven technology, high-grade material and
precise machining of die head, dies and cover form a unit and ensure an
excellent start-cutting performance and easy threading. No stalling of dies.
Long, precise pipe guidance for perfect pipe centering. The chip holes which
become wider at the outside enable good chip flow and clean threads.
The proven, indestructible REMS quality
dies with precise cutting geometry ensure an excellent start-cutting
performance, easy threading and clean threads. Dies in a high-quality
special-grade steel, fully tempered and hardened, for extremely long die life.
REMS Sanitol and REMS Spezial. Specially
developed for threading. High cooling and lubricating effect. Essential for
clean threads and longer service life of dies, tools and machines.
Efficient with REMS Nippelspanner 3/8–2”.
Description Art.-No.
Drive Unit
| Description |
Art.-No. |
| Set R 1/2-3/4-1-11/4 |
540023 |
| Set R 1/2-3/4-1-11/4-11/2-2” |
540024 |
| Set M 20-25-32-40-50 (M x 1.5) |
540025 |
| REMS Amigo 2 Compact Set for
NPT & Other voltages available on request. |
Accessories
| Description |
Art.-No. |
| REMS Amigo 2 Compact drive unit |
540001 |
| Support bracket Amigo 2 Compact |
543010 |
| REMS REG St 1/4–2”, pipe deburrer |
731700 |
| Ratchet lever |
522000 |
| Thread-cutting oil |
Contact Us |
| REMS Nippelspanner 3/8–2” |
Contact Us |
Supply format
REMS Amigo 2 Compact Set. Electric
die stock with quick-change die heads. For pipe threads 1/8–2”, 16–50 mm, bolt
threads 6–30 mm, 1/4–1”. For right and left-hand threads. Drive unit with
maintenance-free gear, powerful universal motor 230 V or 110 V, 50–60 Hz, 1200
W, safety tip switch, power increase thanks to automatic carbon brush
adjustment. Peak power input up to 1800 W. Right and left-hand rotation. Support
bracket for both directions. REMS eva quick-change die heads for pipe threads,
tapered, ISO 7-1 (DIN 2999, BSPT) R right-hand respectively for threading
electric conduit according to DIN DN 60423 M. In sturdy steel case.
Author
Jason P. Moore
Copyright © 2006 [M&S Valves & Fittings]. All rights reserved.
Information in this document is subject to change without notice.
Send
feedback and inquires to msvalves@aol.com
Other products and companies referred to herein are trademarks or registered
trademarks of their respective companies or mark holders.
|
