REMS Crimping Tools

For secure crimping within seconds
Can be used anywhere, free-hand, over head, in confined areas
Only one universal drive unit for operating REMS pressing tongs and pressing tongs/pressing chains of numerous other manufacturers / suppliers
System-specific pressing tongs for all common pressfitting systems, quickly interchangeable
Only one type of pressing tongs for all REMS radial presses and suitable radial presses of other makes
All pressing tongs marked with * fit into the REMS Eco-Press drive unit
Secure seating of pressing tongs by automatic locking
Confirmation of suitability see below.

Information Request Product Order Form

REMS Eco-Press

Compact, handy, light. Drive unit with short tubular arms only 1.6 kg (3.5 lbs)
Dividable tubular arms for individual adjustment of leverage to accomodate different force demands of different pressfitting systems
Secure seating of pressing tongs through locking pins
Final-lock-positioning enables visual check of perfectly pressed joint (completely closed pressing tong)

REMS Eco-Press drive unit. Manual radial press for producing pressing joints of plastic and multi-layer composite tubes Ø 10–26 mm.

For operation with REMS pressing tongs.

Drive unit with final-lock-positioning and dividable tubular arms.

In skin package. Art.-No. 574000 $169.00

Part Number	Price	Order	Choose Quantity
Art.-No. 574000	$169.00

REMS Power-Press E

Electro-mechanic drive unit with maintenance-free reduction gear with safety slipping clutch. Only 4.4 kg (9.8 lbs)
Proven universal motor 110 V, 50–60 Hz, 450 W
The pressing jaws remain closed until switched into reverse. Visual confirmation of a perfectly pressed joint (completely closed pressing tong) possible

REMS Power-Press E Basic-Pack. Electric radial press for producing pressing joints of all common pressfitting systems Ø 10–76 (108) mm. Drive unit.
- In sturdy steel case. Art.-No. 572110 $985
REMS Power-Press E drive unit
- In cardboard box. Art.-No. 572100 $895

Part Number	Price	Check Box to Order Below	Choose Quantity
Art.-No. 572110	$985.00
Art.-No. 572100	$895.00

REMS Power-Press 2000

Electro-mechanic drive unit with maintenance-free reduction gear with safety slipping clutch.
Only 4.8 kg (10.6 lbs)
Proven universal motor 100 V, 50-60 Hz, 500 W
The pressing jaws remain closed until switched into reverse. Visual confirmation of a perfectly pressed joint (completly closed pressing tong) possible

REMS Power-Press 200 Basic-Pack.

Eledtric radial press for producing pressing joints of all common pressingfittings systems Ø 10 - 76 (108) mm. Drive unit in sturdy steel case.

Art-No. 572010 $1,250.00

REMS Power-Press 200 drive unit

In cardboard box. Art-No. 572000 $1,199.00

Part Number	Price	Check Box to Order Below	Choose Quantity
Art.-No. 572010	$1,250.00
Art.-No. 572000	$1,199.00

REMS Akku-Press

Electro-hydraulic drive unit
Only 4.5 kg (10 lbs)
Optimum weight distribution for single-hand operation
Swivelling pressing tongs seat
Eccentric reciprocating pump with robust planetary gear
Powerful battery motor 12 V
Battery 12 V, 2.0 Ah
Rapid charger 110 V, 50–60 Hz, 50 W
Acoustic signal after successful completion of pressing operation enables confirmation of a perfectly pressed joint (completely closed pressing tong) Art.-No. 571010 $1,395.00

Part Number	Price	Check Box to Order Below	Choose Quantity
Art.-No. 571010	$1,395.00

REMS Akku-Press ACC

Electro-hydraulic drive unit
Only 4.5 kg (10 lbs)
Optimum weight distribution for single-hand operation
Swivelling pressing tongs seat
Eccentric reciprocating pump with robust planetary gear
Powerful battery motor 12 V
Battery 12 V, 2.0 Ah
Rapid charger 110 V, 50–60 Hz, 50 W
Automatic-Circuit-Control (ACC): Automatic retraction after completion of pressing operation (Automatic Circuit Control)
Electronic service control with visual maintenance call after approx. 10,000 crimps

Art.-No. 571011

Part Number	Price	Check Box to Order Below	Choose Quantity
Art.-No. 571011

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me
Send me a unit. Contact me by phone for my Visa, Master Card, or AMX

	Bill & Ship To:
Company:
Your Name:
Title:
Purchase Order #:
Credit Card #, Expiration Date
	Shipping Info:
Ship To Name:
Company:
Address:

City:
State, Zip:
	Contact Info:
E-mail:
Phone:
Fax:
Your Website:

Note: Your Credit Card Info will not be given to anyone but the M&S Valves & Fittings Company.

We respect your privacy and understand if you choose to exclude it in your request.

Please tell us how you arrived at our web site

Please contact me as soon as possible regarding this matter.

*You will be given an opportunity to review your order after clicking the submit button. If no changes are necessary you need not do anything else as your order will be submitted the way you see it.

You may return to this page to make changes by using your back button on your browser. The last time you submit this page will be considered a single order and all previous submission attempts will be ignored as multiple items and quantities of each item can be ordered on this single page. Order Submissions from other product pages will be considered separate but valid orders even if you use the same purchase order number.

Author Jason P. Moore.
Copyright © 2008 [M&S Valves & Fittings]. All rights reserved. Send all mail request to [msvalves@aol.com]
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Last modified: May 29, 2008