Copyright © 2008 [M&S Valves & Fittings].
All rights reserved.
Send all mail request to [msvalves@aol.com]
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks
or registered
trademarks of their respective companies or mark holders.
Last modified:
May 29, 2008
This product is similar to our Joint Repair Kit Under Pressure but the butyl rubber tape is not needed or included to fill a joint!
Instructions Contents: Rubber Tape, Syntho-Glass Fiberglass Cloth
1.) Apply the adhesive section of the rubber tape 2" to 3" farthest from the crack or hole. Begin wrapping the tape stretching it to maximum tension. Apply 3 wraps over this section working inward towards and over the crack or hole, go past it 2" to 3" then work your way back and forth using the entire roll until satisfied the leaking has stopped. Now remove adhesive strip from the end of the roll and anchor the rubber tape to the pipe. Do not remove adhesive strip until leak is stopped. If leak has not stopped unwrap & rewrap the pipe until it is stopped with the rubber tape if necessary use a second roll of rubber sealing tape from another kit or you may purchase the rubber tape separately.
2.) Once satisfied the leak is sealed you can apply the Syntho-Glass fiberglass cloth contained in the foil pouch to make the repair permanent. If you want to replace the coupling do not apply the fiberglass cloth because it sets rock hard in thirty minutes. Instead consider freezing the pipe using the Savair mini Freezer for pipes up to 1", Savair Pipe Freezer for pipes up to 2", or FREEZALL - Portable Do-It-Yourself Pipe-Freezing Equipment like the Freezall Pro-Plug jacket kit for larger pipes from 2-1/2" to 6". All operated using ozone safe liquid CO2. We do not recommend using CO2 operated kits for 8" or larger pipes. Ask us about our liquid nitrogen pipe freezing services nation wide.
The combination of these two elements allows a user to seal pipe leaks under pressures up to 60psi.
These kits are compact and fit in your tool box. Designed for a one time pipe repair.
The average cost of a kit to repair a leaking cracked or broken 2" pipe is only $52.50
We stock what we sell. Call 1-800-572-3691 to place your order M-F 8-5 CST.
Time is money, and shutting down a production line or cooling tower costs even more money. Avoid costly shut downs using this patented under pressure pipe repair system!
Pressure Pipe Repair
| Product# | Pipe Size to Repair | Cloth Size Width by Length | Price Each |
| PPS5200 | 1/2" to 1" | 2" x 5' | $34.11 |
| PPS9300 | 1-1/4" to 2" | 3" x 9' | $44.03 |
| PPS4150 | 2-1/2" to 4" | 4" x 15' | $89.22 |
| PPS4300 | 4-1/2" to 6" | 4" x 30' | $171.83 |